Henrob Self Piercing Rivets (HSPR)

HENROB - Self Pierce Riveting

Innovative Joining Solutions

Rivet Types

Henrob Self-Pierce Riveting (HSPR)

'Each family is defined by unique geometry'

Features

There are five families of Henrob self-pierce rivets. Each family is defined by unique geometry and has a range of macro features including head style, stem diameter and stem length. The five groups have been specifically developed to meet different functional requirements and application performances.

Rivet Type Selection

The choice of rivet type for a given application is dependent on numerous performance criteria - see Joint Development for details. A rivet is selected, in conjunction with appropriate tooling, to match the application characteristics such as the examples listed below:

Typical Application Characteristics	Examples
Material Types	Aluminium, Steel, Plastic, Composite
Material - High Ductility	Cold rolled steel sheet, Alu Sheet
Material - Reduced Ductility	Hot rolled steel, Extrusions, Castings
Material - Low Tensile Properties	Mild steel, Non ferrous alloys, Plastic
Material - High Tensile Properties	HSLA steel, DP & TRIP steels
Total Joint Thickness	1mm to 6mm (Steel) 1mm to 10mm(Alu)
Mixed Material Combinations	Plastics to metal, Alu to steel
Structural	Vehicles, Buildings
Non-Structural	Furniture, Cabinets, Attachments

Head Styles

Head styles are selected on the basis of either functional requirements or aesthetic appeal. Functional requirements may be:

head flushness (level with material surface)
shear, peel and fatigue strength
locator or mechanical stop
large bearing surface
attachment points for secondary parts

Countersunk Head

Countersunk

Benefits:

flushness on the head side of the joint
good fatigue resistance

Flat, Pan and Dome Head

Flat Head

Pan Head

Dome Head

Benefits:

provides good peel strength, especially in plastics or thin sheet metals
allows good head seating, especially when riveting thick or very hard materials
accentuates the aesthetics of a riveted joint and/or covers surrounding indentation on a Class A surface

Special Head Styles

Special rivet head styles are supplied when there is a need to combine the functions of the self pierce rivet and an additional feature.

Threaded Stud

Plain Stand Off Pin

T Stud

Rivet Length & Stem Diameter

Rivet length is always matched to the stack thickness to be fastened. A given rivet length will cover a range of material stacks. Testing is carried out to determine the suitability of the rivet length for the material and thickness range being riveted. Henrob offers rivets in lengths of 4 to 14mm.

There are two standard diameters, 3mm and 5mm. The criteria for selecting the appropriate rivet diameter includes:

required strength of joint
required robustness of joint
available access to joining area
material thickness and hardness